Offroad
Ensure reliability in difficult terrain and in remote locations
Area of use
PSI100 Offroad puncture protection solution is developed with focus on reliability in difficult off-road conditions. The product is mainly suitable for vehicles such as:
- ATV
- 4×4 (off-road)
- Motocross / Enduro / Trail
Product data sheet
Product features in focus for Offroad
Reliability under tough conditions
PSI100 is a preventive puncture protection solution that effectively seals air leaks the moment they occur.
Reliability when it matters most
PSI100 Offroad is designed to protect your tires against punctures in the harshest of conditions. During tough off-road driving, it is not uncommon for tires to be exposed to sharp roots, sharp rocks, forgotten metal objects, etc. A puncture in a remote location and/or difficult terrain creates unnecessary and challenging work. With PSI100, a reinforced fiber seal is immediately created at the damage. When the tire has rotated a few revolutions, a strong and permanent seal has been formed that lasts the entire life of the tire. The tire pressure remains intact and you avoid interruptions in the journey.
PSI100 Offroad effectively seals punctures up to 15 mm as well as dry cracks and pores. Tätningen blir stark och beständig under däckets livslängd.
Only few steps to protect your tires
Position the valve
When injecting PSI100, the valve is rotated to the "lower half" of the wheel, towards the road surface. If one imagines the wheel as a dial, the valve should be placed between four (4) and eight (8).
Connect to valve
PSI100 can either be injected directly from the bottle/pump in a tire without pressure, if so the valve needle is removed first. Alternatively, the product can be injected into a pressurized tire through our Quick-fill system.
Inject PSI100
Important to inject volume according to our guide. Detailed information is available on the bottle/container packaging and website.
Rotate wheel
Once PSI100 is injected and the desired tire pressure is restored, the wheel needs to be rotated. After a shorter distance, the product is distributed in the tire and activated.
Full protection
The process typically takes a few minutes per wheel. Once completed, you have a strong tire and puncture protection that will last over the life time of the tire.
Do you want more information?
Share your details and we will contact you shortly
Selected products - Offroad
FAQ
WHEN DO I BEST USE PSI100?
PSI100 is designed to prevent punctures and air leaks in all types of tires. For best performance, the puncture protection solution is injected before the tire is damaged or punctured. Having said that, PSI100 can often be used on an already punctured tyre. If you pump up the tire after injecting it to PSI100 and immediately drive off at a controlled speed, the tire protection will be activated and a seal will be created.
In case of major damage or damage to the tire sides, it is recommended to have the tire checked by a specialist as soon as possible.
CAN I USE PSI100 FOR CAR TIRES?
We do not recommend PSI100 for passenger cars where low-profile tires and high speeds often occur. In some cases, an imbalance may occur. However, PSI100 can be used in emergency situations to get to the tire repair shop for tire repair or replacement.
IS THE PSI100 SOLUTION HAZARDOUS?
Nej. PSI100 är miljövänligt. Punkteringsvätska är utvecklat att värna miljö såväl som enkelt handhavande. Formeln innehåller varken giftiga glykoler eller latexprodukter – som ofta är fallet på marknaden. Får man produkten på händer, hud eller stänk i ögon sköljs det enkelt bort med rent vatten. Produkten är heller ej brandfarligt eller korrosivt.
CAN PSI100 ALSO BE USED IN TIRES WITH TUBES?
Yes. However, it is important to remember that hoses can break in many ways. Large cracks, tears, etc. are not uncommon. If this is the case, the sealing effect is reduced.
WILL PSI100 CREATE A SAFE AND RELIABLE SEAL?
Yes. On the tire tread and the area closest to it, PSI100 will effectively seal punctures and cracks of significant size. The seal formed can be considered permanent, it will not fall off or lose its sealing ability over time. The seal follows the life of the tire.
WILL PSI100 SEAL A DAMAGE ON THE TIRE SIDE?
No. PSI100 is designed to effectively seal damage to the tread, not the tire side. The product can in however often repair minor cracks and pores on the side of the tire that cause minor air leakage.
IS THE AMOUNT OF PSI100 IMPORTANT FOR INTENDED FUNCTION?
Yes, recommended volume is crucial. Different vehicle and tire types have different requierments. Choose the right amount for the vehicle type and tire size based on PSI100 Volume Guide.
WILL PSI100 FREEZE IN WINTER COLD?
No. PSI100 is tested to -35°C. Under that temperature, the viscosity is affected but quickly returns after a while due to the frictional heat created in the tire.
CAN A TIRE BE VULCANIZED AFTER PSI100 IS USED?
Yes. PSI100 is easily washed off with water.